The Complete Guide to Modification for Competition of the Fiat X1/9

The Complete Guide to Modification for Competition of the Fiat X1/9 scr1

PROJECT X19 – The Complete Guide to Modification for Competition of the Fiat X1/9 PDF Free Download

The information contained in this volume has been prepared by PBS Engineering of Garden Grove, California at the request of Fiat Motors. In it, PBS makes available to the SCCA competitor the sum total of many years of experience in the preparation for racing of Fiat cars. It is our hope that this information will be of value to those who compete with Fiat XI19 automobiles. Clarification on the methods described, if needed, should be obtained directly from PBS Engineering. This book is not intended as a substitute for the shop manuals and guides that Fiat Motors makes available for the servicing of its products. It is written to be used in conjunction with such manuals and guides.
Fiat Motors wishes you the best for success in your competitive efforts with the XI 19.

Modifications of the type described herein are not suitable for vehicles licensed for street use. They will also render
the vehicle illegal for street use, as Federal law restricts the removal or modification of any part of Federally required
emission control systems. Further, many states have enacted laws with various penalties for tampering with, or otherwise modifying, any required emission or noise control system. Though SCCA General Competition Rules have been taken into account in the preparation of these recommendations, it is the responsibility of each individual
owner or driver to ensure that his car conforms to the SCCA rules. Neither Fiat Motors of North America nor its
dealers can be held responsible in connection with any protest or disputes resulting from illegal modification of parts. Fiat vehicle and parts warranties are voided if the vehicle or part is used for competition or if they fail as a result of modification. Competition parts or assemblies described herein as offered by PBS Engineering or any other vendor are sold “as is” without any warranty whatsoever. The entire risk as to quality and performance of such parts is with the buyer.

CONTENTS:

CHASSIS BODY
REAR SUSPENSION
Rear Suspension BodyIFrame Modifications
Rear Strut Modifications
Rear Adjustable Camber Plates
Rear Anti-Roll Bar
Rear Suspension Bushings
Left Rear Control Arm Modification
FRONT SUSPENSION
AND STEERING
Front Suspension BodyIFrame Modifications
Modifications to the Front Struts
Front Adjustable Camber Plates
Steering Rack and Mounting Modifications
Front Anti-Roll Bar
Front Suspension Bushings
BRAKES
Front Brakes (F-Production 1500 XI191
Front Brakes (G-Production 1300 XI19
Rear Brakes (G- and F-Production)
Brake Master Cylinders
ROLL CAGE
WHEELS, TIRES AND
WHEEL ALIGNMENT
Wheels
Tires
Wheel Alignment
Dry Sump Oil System
Cylinder Bores
Crankshaft
Pistons
Connecting Rods
Bearings
ENGINE ASSEMBLY
Checking Piston, Head and Valve Clearance
Checking Cam Timing
Head Bolts
Pan Baffle
CARBURETOR AND INTAKE
MANIFOLD MODIFICATIONS
Carburetor
Intake Manifold
IGNITION SYSTEM
1300 Ignition System
1500 Ignition System
EXHAUST SYSTEM
TRANSMISSION, FINAL DRIVE,
CLUTCH AND FLYWHEEL
Changes Associated With 5-Speed Gearbox
Close Ratio Gears
Bearing Sleeves
Differential
Flywheel and Clutch
1500 C-V Joints
BODY MODIFICATIONS
Seat
Fender Flares
Windshield
Grill
Air Dam
PLUMBING, ELECTRICAL
AND INSTRUMENTATION
Oil System
Fuel System
Brake Plumbing
Clutch Plumbing
Cooling System
Fire Suppression System
Wiring
Instrumentation and Switches
ENGINE
CYLINDER HEAD
AND VALVE GEAR
Ports
Combustion Chamber
Valves
Valve Springs
Cam and Cam Timing
Tappets
Valve Guides
Head Gasket
ENGINE SHORT BLOCK

Language: English
File: PDF
Size: 125.5 Mb
Free download The Complete Guide to Modification for Competition of the Fiat X1/9 PDF
https://cloud.mail.ru/public/Hm8b/gYhD6zyBy